Microcom 326M Betriebsanweisung PDF herunterladen (Seite 16)

Printer Specifications Chapter 1

4 326M User’s Guide

1.3 Media Specifications

Media Types

Continuous, die-cut, preprinted and tag stock

either rolled (up to 8” in diameter) or fanfold.

Maximum Media Thickness

.010” (.25mm) * see note below.

Maximum Media Width

326M = 3.5” (90mm) ** see note below.

426M = 4.5” (115mm) *** see note below.

Table 3 Media Specifications

The printers may be optimally configured with a fixed media guides to assist in the

installation of media.

*NOTE: The printers may print on thicker media types depending on the pliability of the

material; however, this requires testing and evaluation. Contact your authorized Microcom

Corporation representative for additional information regarding testing and evaluation of

thicker or rigid media types.

**NOTE: The 326M printer’s media path has a maximum width of 3.5” while the actual

printable width is 3.15” for the 203 DPI and 3.189” for the 300 DPI print head.

***NOTE: The 426M printer’s media path has a maximum width of 4.5” while the actual

printable width is 4.094” for the 203 DPI and 4.252” for the 300 DPI print head.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 72 73

Keine Kommentare

Microcom 326M Betriebsanweisung Seite 16